777 Home | Feature ListScreenshotsDownloadFAQ 

 

Key Highlights

Opening Engines

Opening Cockpit Windows

Deployable Ram Air Turbine

Folding Wings

Flexing Wings

Virtual Cabin

Dynamic Wingviews

Metal glare effects

Reflective surfaces

Animated Hydraulic Pistons where appropriate

Animated flexible gear hoses

The Full List...

Totally scratch rebuilt model

Built from the ground up in Discreet GMax, taking full advantage of all that FS2002 has to offer!
 

Maintenance Mode

For the first time ever, open the engines and look inside, slide open the Captain’s window, deploy the Ram Air Turbines, open the gear bay doors while on the ground and pop in!
 

Virtual Cabin

Bored? Then get up and take a walk around the cabin! Presently, you can walk through the Business Class Cabin.
 

Metal glare effects

Otherwise referred to as “dynamic shine” or “sun reflecting off the metal”. See the Sun reflecting off the fuselage!
 

Reflective surfaces

Almost all surfaces have reflective textures. See the metal!
 

Animated Folding Wings

Although this option has never been purchased by any airline, this feature is modeled in the model. See the outboard section of the wings smoothly fold upwards!
 

Animated Flexing Wings

See the wing, engine and associated control surfaces smoothly flex upwards! No more popping from position to position.
 

Animated Hydraulic Pistons

As you extend the spoilers, watch the hydraulic pistons push the spoilers up. As the maingear retracts, watch the pistons in action!
 

Steerable Nose and Main Gear

When the aircraft taxies on the ground, watch the nosegear steer. Just like the real 777, the aft axle of the main gear also starts steering once the nosegear steers above a certain degree.
 

Fully animated engines

When the engines are spooling up or shutting down, watch the 3D fan blades spin. When the engines are running, watch the motion blur. When landing, watch the reverse thrust cascades open and close smoothly
 

Animated reversers with fan air blocker doors

See the reversers slide open, and now, watch the fan air blocker doors close to deflect the air forwards. Views from the back of the engine recommended!
 

Tilting and compressed/uncompressed landing gear

As you smoothly rotate at Vr speed, see the nosegear smoothly “extend” downwards as the gears become uncompressed. Then, see the huge main gear trucks smoothly tilt back and "hang" down as the giant leaves the ground.
 

Dynamic Wing views

Look out the window and see the engines spinning, reverse thrusters deploying, slats and flaps extending, all fully animated!
 

Animated landing gear

Smooth extension and retraction of landing gear. Complex struts and hydraulic pistons modeled as well.
Incredible Detail! Gear hoses are all modeled and animated! See the flexible gear hoses move about as the gear extends or retracts.
 

Animated control surfaces

See the control surfaces move!

Incredible Detail! Watch the hydraulic pistons push the spoilers, or the flap track mechanisms, the secondary rudder in addition to the primary rudder, and much more.
 

Specific engine types modeled

The three engines - Pratt & Whitney 4000 (112-inch fan) series, Rolls Royce Trent 800, and General Electric GE90 - are all modeled, complete with their specific type of engine strut. What's more, each engine variant has been modeled with its specific type of fan blade. The detail goes right down to the number of blades each type of engine has and the direction they spin.
 

3D Exterior Cockpit

See the "office" and the pilots inside. Note the 3D window struts!
 

3D pitot tubes and windshield wipers

Modeled after the real 777.
 

3D slat, flap, spoiler, and gear bays

When the flaps are extended and the spoilers are up, see right through the wing. See the gears retract into their housing.
 

Dimensioned to accuracy

Major and most minor dimensions are modeled to real dimensions.
 

Much more stuff...

You just have to see it for yourself!
 

 


Copyright © 1997 - 2008 MelJet (Melvin Rafi) All rights reserved.